Fishing gear security

1.frequency:433.92MHZ 2.operating voltage:7--12VDC 3.Operating current:30mA 4.receive sensibility:--115dbm 5ASK modulation

            

The function spec of the fishing gear control trigger (sample)

A.  The basic function of the fishing gear control

power on, ring 3 times, and two green LED flash 3 timessignal trigger: turn and trigger forward, setup the select two sound alternation that has close frequency segment, for example: 1-5, 1-5..; turn the trigger orderly, setup the select sound ring 1……for longTone modulation: press the tone modulation button, each press may change a tone, and has the corresponding sound. Choose the tone and the corresponding sound will sound in same time. There are 4 tones available in all.Volume modulation: press the volume button, each press may change a tone, and has the corresponding sound. Choose the volume and the corresponding sound will sound in same times. There are 4 volumes available in all.Sensibility modulation: press the sensibility modulation button, each press may change a sensibility, choose the sensibility and the corresponding sound will sound in the same times. There are 4 grades sensibility available. The first grade is the most sensibility, and the fourth grade is the lowest.When the signal is triggered, LED is not light.Dial coding operationStatic state electric current: 100uA, operating electric current: 30mA

B.       The basic function of the fishing gear control receiver

Switch engine key: press “on” under the working state, it’s on, press again and it’s off. When it’s on, it rings “Du, Du, Du” for 3 times, all of the LED flash 3 times. When it’s off, Di rings one time for a long, and all LED flash one time at the same time.Volume modulation key: There are two keys for volume modulation: addition and reduce, and 4 grades volumes can be modulated, 5 grades are vibration. The “on” state is defaulted as 3 grades. When volume is added for one grade, the receiver rings the same times, LED flashes the same times. Up to the 5 grades, the machine vibration one time, LED flash one time. After that time, press addition key, it will keep at the fifth grade, and machine vibration and LED flash one time. Press reduce key, the volume reduces, and reduces one grade each times. Down to 1 grade, when press reduce key, it will not reduce. After the signal is received, the corresponding LED flashes all the time, and ends until some key is pressed, and it rings during the signal is received.Dial code operation.Static state electric current: 4.2mA, operating electric current: 15mAThe tone can not be modulated.  

Fishing gear security