- Speaker & Horn[9]
- Car Reversing Aid[2]
- Diagnostic Tools[1]
- Garage Door Openers[1]
- Other Accessories & Parts[10]
- Remote Control[10]
- Other Active Components[1]
- Access Control System[10]
- Other Access Control Products[2]
- Alarm[3]
- Key[1]
- Other Security & Protection Products[1]
- Other Telecommunications Products[10]
- Telecom Parts[10]
- Wireless Networking Equipment[10]
- Other Mobile Phone Accessories[1]
- Other Outdoor Toys & Structures[1]
- Contact Person : Mr. Yin Mike
- Company Name : Shenzhen KST Technology Co., Ltd.
- Tel : 86-0755-27593269,13148759737,13682630429
- Fax : 86-0755-27840581
- Address : Guangdong,SHENZHEN,6 floor A building, zhongtai Technology Industrial Park, zhuao third industrial park, gushu,xixiang Street, Baoan District,shenzhen
- Country/Region : China
- Zip : 518005
Related Product Searches:ASK Water storage controller,High Quality,ASK Water storage controller , 433.92MHZ controller,KST-RFJDQ001
KST-RFJDQ001 technical parameters: 1. Working voltage: +12 VDC 2. Operating Current: 30mA 3. Relay external load voltage: 0 - 220VAC 4. Relay external load current :0-10A 5. Operating frequency: 433.92MHz 6. Modulation: ASK 7. Receiver sensitivity:-100-110dbm 8. Operating temperature: -40 °C +85 °C 3, KST-RFJDQ001 on the code method: a) To ensure the mutual non-interference in the factory each KST-RF029 transmitter identification code only, so the need for the use of the code before it can work. b) to the receiver (KST-RFJDQ001) power; c) Press (KST-RFJDQ001) to learn button S1 (LEARN), LED light, now that the state has entered on the code; d) by KST-RF029 transmitter button on the learning (LEARN) 2 times (by a LED off), LED flash 2 times, said the success of the code; and out of the code state; e) Repeat 2-3, can be done with the other fired on the code; up with 15 KST-RF029 transmitter carried on the code; f) In the course of the code has the KST-RF029 transmitter unique identification ID stored in the receiver's EEPROM, so powered off, the code will not be lost on the good; g) If the 15S state in the yard does not receive the new code needs to launch, then the automatic withdrawal of the code states. 4, KST-RFJDQ001 clear all KST-RF029 transmitter ID of the method: h) to the receiver (KST-RFJDQ001) power; i) Press and hold S1 (LEARN) to learn the button pressed, about 6S LED flash 4 times after that on the yard in front of all has been removed; At this point you can release the keypad; j) If you need to re-code duplication (a) above steps can be 1,2,3,4.
ASK Water storage controller